Cisco CCNA Certification: Defining Broadcast Domains

The Awesome Article Database

Articles Area
	Home
	Browse Articles
	Search Articles
	Submit/Edit Articles
	Get RSS Feeds
	Free Articles Content
	Most Viewed
	Popular Articles
	Latest Articles
	Most Emailed
	Articles Rating

Popular Articles
	Vitamin Capsules, Li
	How To Make Money Wi
	Natural Ways to Indu
	Gastric Bypass Recov
	Jewelry Shopping for

Latest Articles
	Toronto Psychotherap
	Destination for Mili
	Retail Store for Arm
	Precision Engineers:
	Tailored-Golf Soluti

For Publishers
	Free Email Alert
	Manage Subscriptions
Guidelines
	Author
	Publishers
	Terms & Conditions
Advertise Here
	Contact Us to Advertise

Home \| Computers \| Networks \| Cisco CCNA Certifica ... Cisco CCNA Certification: Defining Broadcast Domains Submitted by Chris on 2006-02-15 and viewed 211 times.

Rate This Article |

Add Comments |

Send To Friends|

View Comments (0)

Publisher |

To become a CCNA and an outstanding network administrator, you’ve got to know how to limit broadcasts in your network. Learn the basics from Chris Bryant, CCIE #12933.

When you're studying to pass the CCNA exam and earn your certification, you're introduced to a great many terms that are either totally new to you or seem familiar, but you're not quite sure what they are. The term "broadcast domain" falls into the latter category for many CCNA candidates. A broadcast domain is simply the group of end hosts that will receive a broadcast sent out by a given host. For example, if there are ten host devices connected to a switch and one of them sends a broadcast, the other nine devices will receive the broadcast. All of those devices are in the same broadcast domain. Of course, we probably don't want every device in a network receiving every single broadcast sent out by any other device in the network! This is why we need to know what devices can create multiple, smaller broadcast domains. Doing so allows us to limit the broadcasts traveling around our network - and you might be surprised how much traffic on some networks consists of unnecessary broadcasts. Using the OSI model, we find devices such as hubs and repeaters at Layer One. This is the Physical layer, and devices at this layer have no effect on broadcast domains. At Layer Two, we've got switches and bridges. By default, a switch has no effect on broadcast domains; CCNA candidates know that a switch will forwar

d a broadcast out every single port on that switch except the one upon which it was received. However, Cisco switches allow the creation of Virtual Local Area Networks, or VLANs, that are logical segments of the network. A broadcast sent by one host in a VLAN will not be forwarded out every other port on the switch. That broadcast will be forwarded only out ports that are members of the same VLAN as the host device that sent it. The good news is that broadcast traffic will not be forwarded between VLANs. The bad news is that no inter-VLAN traffic at all is allowed by default! You may actually want this in some cases, but generally you're going to want inter-VLAN traffic. This requires the use of a router or other Layer 3 device such as a Layer 3 Switch. (Layer 3 Switches are becoming more popular every day. Basically, it's a switch that can also run routing protocols. These switches are not tested on the CCNA exam.) That router we just talked about also defines broadcast domains. Routers do not forward broadcasts, so broadcast domains are defined by routers with no additional configuration. Knowing how broadcasts travel across your network, and how they can be controlled, is an important part of being a CCNA and of being a superior network administrator. Best of luck to you in both of these pursuits!

Article Source: http://www.awesomewebessentials.com/